BÖHLER K100 is a 12% ledeburitic chromium steel and corresponds to material number 1.2080 (X210Cr12). This commonly used tool steel is highly resistant to abrasive wear. Compared to modern cold work tool steels, BÖHLER K100 has the advantage of simple heat treatment with lower hardening temperatures and single tempering. However, this characteristic tempering behaviour limits the use of advanced coatings.
| Compressive strength | Dimensional Stability in heat treatment | Toughness | Wear resistance abrasive | Wear resistance adhesive |
|---|---|---|---|---|
|
|
|
|
|
|
| SEL | UNS | EN | AISI | JIS |
|---|---|---|---|---|
| 1.2080 | ~T30403 | X210Cr12 | ~D3 | ~SKD1 |
| EN ISO |
|---|
| 4957 |
| C | Si | Mn | Cr | |
|---|---|---|---|---|
| 2.00 | 0.25 | 0.35 | 11.50 |
Information on Long Products ) Presented data refer exclusivly to long products. Please observe the detailed explanations at the end of the data sheet (pdf).
